Friday, February 17, 2017

5 Step How to Asbestos Testing from Home

5 Step How to Asbestos Testing from Home

5 Step How to Asbestos Testing from Home - Commercial forms of asbestos testing can be very expensive. And, many asbestos testing kits retailing, but accuracy and their results can be debated. Therefore, you might want to try some asbestos testing methods that you can try in your home.

WARNING:

Asbestos is dangerous, and the inhalation of dust of asbestos can cause lung cancer. The area is known to have a high risk of asbestos contamination ex: walls and flooring, and roofing materials such as shingles. However, this surface generally does not release asbestos dust unless you alter or disturb. Therefore, you do not have to disturb the surface of asbestos until you receive the test results.

However, if the surface treatment can not be avoided, it is advisable to follow a few precautions. If you plan to clean these surfaces, remember to use the appropriate protective equipment. If someone showed early signs of inhaled asbestos, such as shortness of breath or sudden you cough, then immediately seek medical help.


Asbestos Testing Basics You Need to Know

Testing on asbestos is generally recommended for every type of building. However, if you have an old house more than a decade, then testing for asbestos to be very important. This is because previously, asbestos is commonly used as a building material, and has harmful effects is not known by most people. Even now, the asbestos used for thermal and electrical insulation is still often used.

Best means for asbestos testing is to collect samples and send them to official testing center. Many do-it-yourself kits that are sold to collect samples, but you can collect a sample test yourself by using the following information.

Asbestos Testing Step 1 - Identify Potential Asbestos Contamination

There are many sources of asbestos contamination. Some areas that have a high probability generally overlooked, including asbestos contamination in the room containing radiators and heating systems, and areas with traditional wired circuitry.

Asbestos Testing Step 2 - Getting Prepared for Drizzling

You have to prepare yourself with a mask and plastic gloves. You do not have to clean the area suspected of containing asbestos under vacuum before testing for asbestos. Ideally, homeowners should stay away for two days from the designated area before testing is done. Close the ventilation and heating or cooling equipment before collecting the sample. using equipment such as a vacuum cleaner. Spread a new plastic sheets or wash the floor. Then, fill the bottle with water spraying.

Asbestos Testing Step 3 - Drizzle Region

Spray the area repeatedly, ensuring that the mist has been dispelled in every part of the room. Humidity in the air to make sure that the dust is no longer visible and begins to stick on plastic sheets. Use scissors to cut the plastic sheet into pieces. it is your test sample.

Asbestos Testing Step 4 - Place sample in Bag

Place the sample in a plastic bag and label with ID number and the date and time for sample collection later.


Asbestos Testing Step 5 - Shipping Samples

After all finished, Send your asbestos testing samples to the EPA-accredited, asbestos-testing laboratory. You should avoid areas that you have the test until your test results have been received.

That's 5 Steps How Asbestos Testing of the home, I hope to be useful to you, and share this article if it helps you.



If you liked the article on this blog, please type your email in the box below for a free subscription via e-mail, so you'll get sent articles every article published in mesotheliomaaround.com